Print

AA131 – Wet/Dry Water and Vacuum Surface Mount

Specs
-Constructed of pvc and brass fittings.:
-Contains a standard central vacuum suction port and brass quick connect water outlet.:
-Has two switch options for turning on the vacuum system by using a toggle switch or by plugging into the suction port. (Depending on how it is installed):
UTILITY REQUIREMENTS
-Suction is connected with a standard 2 inch central vacuum pipe.:
-Water is connected with 1/4 inch fitting:


Product Description:

Wet/Dry Water and Vacuum Surface Mount

-Surface mounts are used in a location where in-wall outlets are not possible.
-Constructed of pvc and brass fittings.
-Contains a standard central vacuum suction port and brass quick connect water outlet.
-Suction is connected with a standard 2 inch central vacuum pipe.
-Water is connected with 1/4 inch fitting
-Has two switch options for turning on the vacuum system by using a toggle switch or by plugging into the suction port. (Depending on how it is installed)



Part Number: AA131