Replacements Archives - Aqua-Air Wet/Dry

HOSE CUFF PLASTIC WITH SOLID METAL BAND 1.25 TO 1.5 (PA279)

aquaairwetdry — Thu, 29 Jun 2023 21:26:50 +0000

Hose cuff (pa279) plastic with a solid metal band 1.25 inch to 1.5 inch

This is replaces the hose to wall connection on our black vacuum hose.

The post HOSE CUFF PLASTIC WITH SOLID METAL BAND 1.25 TO 1.5 (PA279) appeared first on Aqua-Air Wet/Dry.

AV24-B 8.4 BRUSH KIT

aquaairwetdry — Tue, 20 Jun 2023 19:33:42 +0000

REPLACEMENT BRUSHES FOR THE AMETEK 8.4 MOTOR

FOR USE WITH THE AQUA-AIR MODEL AA003 W/8.4 (MODEL 158) AND AA004 W/8.4 (MODEL 258)

The post AV24-B 8.4 BRUSH KIT appeared first on Aqua-Air Wet/Dry.

Micro Filter-PU01

aquaairwetdry — Thu, 19 Jan 2023 21:22:58 +0000

Replacment filter for the portable unit.

The post Micro Filter-PU01 appeared first on Aqua-Air Wet/Dry.

VeeJet Brass 1/4′ FPT-B280

aquaairwetdry — Thu, 19 Jan 2023 19:45:25 +0000

Replacement Brass Veejet for Pre-Spray Wand AA115.

The post VeeJet Brass 1/4′ FPT-B280 appeared first on Aqua-Air Wet/Dry.

Solenoid Valve-PA048

aquaairwetdry — Tue, 17 Jan 2023 21:02:01 +0000

A solenoid valve is a device that is used to control the flow of a fluid or gas through a valve or other flow-control component. It typically consists of a solenoid, which is an electrically-controlled coil of wire that generates a magnetic field when energized, and a valve body or opening that is connected to the solenoid. When the solenoid is energized, the magnetic field causes a plunger or other actuator to move, opening or closing the valve. The term “solenoid valve” refers to the specific type of valve that uses a solenoid to control the flow of the fluid or gas.

The post Solenoid Valve-PA048 appeared first on Aqua-Air Wet/Dry.

Whip Hose 56″-AA261

aquaairwetdry — Mon, 16 Jan 2023 20:43:06 +0000

Clear replacement water line on wand

Part Number: WHIP HOSE AA261

The post Whip Hose 56″-AA261 appeared first on Aqua-Air Wet/Dry.

Whip Hose 46″-AA261R

aquaairwetdry — Mon, 16 Jan 2023 20:36:30 +0000

Clear replacement water line on wand AA261R

Part Number:WHIP HOSE AA261R

The post Whip Hose 46″-AA261R appeared first on Aqua-Air Wet/Dry.

Adapter, 1 1/2” ABS Male-NM5042

aquaairwetdry — Fri, 13 Jan 2023 20:21:38 +0000

An ABS adapter with male ends is a pipe fitting that is used to connect two pipes, fittings, or other components together in a plumbing or other fluid-handling system. It typically consists of a pipe or fitting with a male end, which has an external thread or protrusion that can be connected to a female end of another pipe or fitting. Which has a diameter of approximately 1 1/2 inches. The material of the adapter is made of a type of plastic known as acrylonitrile-butadiene-styrene. ABS is a strong, durable, and lightweight material that is resistant to impact, chemicals, and extreme temperatures.

The post Adapter, 1 1/2” ABS Male-NM5042 appeared first on Aqua-Air Wet/Dry.

Mounting Board w/Brackets 24″-AA027

aquaairwetdry — Fri, 13 Jan 2023 20:01:29 +0000

A Mounting Board with Brackets 24″ is a type of mounting or installation device that is used to attach or secure a system to a surface. It consists of a flat board or panel that is equipped with brackets or other mounting hardware, and may be made of a durable and long-lasting plastic. The mounting board with brackets may be used in a variety of different applications, such as in the context of a vacuum cleaner or other cleaning equipment, and may be used to mount a suction port, hose, or other component to a wall, floor, or other surface.

The post Mounting Board w/Brackets 24″-AA027 appeared first on Aqua-Air Wet/Dry.

Pre-Spray Wand-AA115

aquaairwetdry — Fri, 13 Jan 2023 19:27:47 +0000

This wand is most commonly used for chemical pre-spray but can also be used to just spray water as well.

The post Pre-Spray Wand-AA115 appeared first on Aqua-Air Wet/Dry.