Vacuum unit Archives - Aqua-Air Wet/Dry

Wall Holder, Brackets (3 Pieces)-PA009

aquaairwetdry — Tue, 17 Jan 2023 21:03:09 +0000

The post Wall Holder, Brackets (3 Pieces)-PA009 appeared first on Aqua-Air Wet/Dry.

Hose Clamp, 7/32” to 5/8”-PH05

aquaairwetdry — Tue, 17 Jan 2023 21:02:18 +0000

A hose clamp is a device used to secure a hose or other flexible tube onto a fitting or other component. It consists of a strip of metal or other material that can be tightened around the hose to hold it securely in place. The term “7/32” to 5/8”” refers to the size range of the clamp, which is capable of fitting onto hoses or tubes with a diameter between 7/32 inches and 5/8 inches.

The post Hose Clamp, 7/32” to 5/8”-PH05 appeared first on Aqua-Air Wet/Dry.

Solenoid Valve-PA048

aquaairwetdry — Tue, 17 Jan 2023 21:02:01 +0000

A solenoid valve is a device that is used to control the flow of a fluid or gas through a valve or other flow-control component. It typically consists of a solenoid, which is an electrically-controlled coil of wire that generates a magnetic field when energized, and a valve body or opening that is connected to the solenoid. When the solenoid is energized, the magnetic field causes a plunger or other actuator to move, opening or closing the valve. The term “solenoid valve” refers to the specific type of valve that uses a solenoid to control the flow of the fluid or gas.

The post Solenoid Valve-PA048 appeared first on Aqua-Air Wet/Dry.

Tank Bottom Assembly With Float-PA006A

aquaairwetdry — Tue, 17 Jan 2023 20:57:02 +0000

A tank bottom assembly with float is a type of device that is used to support and contain a liquid or material within a tank or container, and includes a float, which is a device that is used to measure or regulate the level of the liquid or material in the tank. The float is a buoyant object that is attached to a mechanical or electrical system that can be used to monitor or control the liquid level in the tank.

The post Tank Bottom Assembly With Float-PA006A appeared first on Aqua-Air Wet/Dry.

Portable Wet/Dry Vacuum Kit-PU6.6RES

aquaairwetdry — Tue, 17 Jan 2023 19:26:50 +0000

This Kit Includes:

40 ft– AA279 wet dry hose

1- AA261R Wand

1- AA379 Floor tool

1- PA209 Acrylic carpet head

1- Hose adaptor for constant water flow

The post Portable Wet/Dry Vacuum Kit-PU6.6RES appeared first on Aqua-Air Wet/Dry.

Model 130 Central Vacuum Unit & Wet Extractor-AA001

aquaairwetdry — Tue, 17 Jan 2023 18:53:54 +0000

Single Canister (14? x 47?)
5.7? Extractor Motor, 3 stage, epoxy coated sealed bearings
137? Water Lift
101 CFM
13.7 amp
120 volts
Ideal for homes up to 4,000 square feet

The post Model 130 Central Vacuum Unit & Wet Extractor-AA001 appeared first on Aqua-Air Wet/Dry.

Debris Separation Chamber-AA004-S

aquaairwetdry — Tue, 17 Jan 2023 18:34:48 +0000

Our debris separation chamber is a component in our vacuum units that separates debris from the waste being sent to the drain.

The post Debris Separation Chamber-AA004-S appeared first on Aqua-Air Wet/Dry.

Model 150 Heavy Duty Central Vacuum Unit & Wet Extractor-AA003

aquaairwetdry — Tue, 17 Jan 2023 18:13:20 +0000

‘-Single Canister (14? x 47?)
-7.2? Extractor Motor 3 stage, epoxy coated sealed bearings
-145? Water Lift
-102 CFM
-14amp
-120 volts
-Ideal for homes and light commercial up to 5,000 square feet
-CSA certified

Part Number: AA003

The post Model 150 Heavy Duty Central Vacuum Unit & Wet Extractor-AA003 appeared first on Aqua-Air Wet/Dry.

Dry Motor Booster 8.4-AA003-MB 8.4

aquaairwetdry — Mon, 16 Jan 2023 21:25:54 +0000

Booster Motor for Model 258 with separation tank
8.4? Extractor Motors, 2 stage, High Efficiency
Motor rated at 146? Water Lift
141 CFM
14 amp
120 volts

The post Dry Motor Booster 8.4-AA003-MB 8.4 appeared first on Aqua-Air Wet/Dry.

Model 258 Heavy Duty Central Vacuum Unit & Wet Extractor with 2-AA004 W/8.4

aquaairwetdry — Mon, 16 Jan 2023 19:01:21 +0000

Product Description:
Dual Canister System: Power unit is attached to Debris Separation Tank
Dual Canister Units provide easy cleaning in high volume dirt and debris situations

Suitable for up to 10,000 square feet

Two 8.4″ Extractor Motors, 2 stage, High Efficiency, epoxy coated sealed bearings
Each motor rated at 146″ Water Lift
283 CFM
14 Amp, each motor
120 volts (Available in 220-240v also)

Separation Tank and Power Unit can be mounted separately from each other
Power Unit (motor canister) 14″ x 33″
Debris Separation chamber 14″x 47″

Ideal for large boarding kennels and detail shops

Part Number: AA004

5 Gal capacity

Fuse-(2) 20 Amp circuits

Electrical panel- (2)20A circuit breaker,

Motor code -two Ametek 8.4″ extractor motors, 2 stage epoxy.

The post Model 258 Heavy Duty Central Vacuum Unit & Wet Extractor with 2-AA004 W/8.4 appeared first on Aqua-Air Wet/Dry.