Power Unit Replacement Part Archives - Aqua-Air Wet/Dry

Hose Clamp, 7/32” to 5/8”-PH05

aquaairwetdry — Tue, 17 Jan 2023 21:02:18 +0000

A hose clamp is a device used to secure a hose or other flexible tube onto a fitting or other component. It consists of a strip of metal or other material that can be tightened around the hose to hold it securely in place. The term “7/32” to 5/8”” refers to the size range of the clamp, which is capable of fitting onto hoses or tubes with a diameter between 7/32 inches and 5/8 inches.

The post Hose Clamp, 7/32” to 5/8”-PH05 appeared first on Aqua-Air Wet/Dry.

Solenoid Valve-PA048

aquaairwetdry — Tue, 17 Jan 2023 21:02:01 +0000

A solenoid valve is a device that is used to control the flow of a fluid or gas through a valve or other flow-control component. It typically consists of a solenoid, which is an electrically-controlled coil of wire that generates a magnetic field when energized, and a valve body or opening that is connected to the solenoid. When the solenoid is energized, the magnetic field causes a plunger or other actuator to move, opening or closing the valve. The term “solenoid valve” refers to the specific type of valve that uses a solenoid to control the flow of the fluid or gas.

The post Solenoid Valve-PA048 appeared first on Aqua-Air Wet/Dry.

Tank Bottom Assembly With Float-PA006A

aquaairwetdry — Tue, 17 Jan 2023 20:57:02 +0000

A tank bottom assembly with float is a type of device that is used to support and contain a liquid or material within a tank or container, and includes a float, which is a device that is used to measure or regulate the level of the liquid or material in the tank. The float is a buoyant object that is attached to a mechanical or electrical system that can be used to monitor or control the liquid level in the tank.

The post Tank Bottom Assembly With Float-PA006A appeared first on Aqua-Air Wet/Dry.

Vacuum Motor, 7.2” 3 Stage, 150/250-AV22A

aquaairwetdry — Wed, 11 Jan 2023 19:55:55 +0000

A vacuum motor is a motor that is used to power a vacuum cleaner.

Part Number: AV22A

The post Vacuum Motor, 7.2” 3 Stage, 150/250-AV22A appeared first on Aqua-Air Wet/Dry.

Vacuum Motor – 5.7″ 3 STAGE-AV23A

aquaairwetdry — Wed, 11 Jan 2023 19:54:30 +0000

A vacuum motor is a motor that is used to power a vacuum cleaner.

Part Number:AV23A

The post Vacuum Motor – 5.7″ 3 STAGE-AV23A appeared first on Aqua-Air Wet/Dry.

Vacuum Motor – 8.4″ 2 STAGE-AV24A

aquaairwetdry — Wed, 11 Jan 2023 19:50:38 +0000

A vacuum motor is a motor that is used to power a vacuum cleaner.

Part Number: AV24A

The post Vacuum Motor – 8.4″ 2 STAGE-AV24A appeared first on Aqua-Air Wet/Dry.

Bolt, 1/4-20 x 3.5” for 230 Motor-PA407

aquaairwetdry — Wed, 11 Jan 2023 19:11:31 +0000

A bolt is a type of fastener that consists of a cylindrical shaft with a head on one end and threads on the other end. It is designed to be inserted through a hole or other opening in a piece of material and tightened into place using a tool such as a wrench or socket. The term “1/4-20 x 3.5”” refers to the size and specifications of the bolt, which has a diameter of 1/4 inch, 20 threads per inch, and a length of 3.5 inches. The reference to a “230 motor” suggests that the bolt is intended for use with a specific type of motor, likely one with a 230-volt power rating.

The post Bolt, 1/4-20 x 3.5” for 230 Motor-PA407 appeared first on Aqua-Air Wet/Dry.

Rubber Coupler, 2” ID-PA050

aquaairwetdry — Wed, 11 Jan 2023 18:11:51 +0000

A rubber coupler, 2″ ID is used to connect two pipes or other tubular components together in a plumbing or piping system. It typically consists of a short length of rubber or other flexible material, with fittings or connectors at each end that can be attached to the pipes or components to be joined. The term “rubber coupler” refers to the specific type of coupler that is made of rubber or a similar flexible material. The term “2” ID refers to the size of the coupler, which is designed to fit pipes or components with an inside diameter (ID) of approximately 2 inches

The post Rubber Coupler, 2” ID-PA050 appeared first on Aqua-Air Wet/Dry.

Muffler-PA044

aquaairwetdry — Wed, 11 Jan 2023 18:09:31 +0000

A muffler is a device that is used to reduce the noise produced by our units. It exhaust system of the engine, and is designed to absorb or dissipate the sound waves produced by the exhaust gases as they are expelled from the engine. The term “muffler” is most commonly used to describe this type of noise-reducing device on an internal combustion engine.

The post Muffler-PA044 appeared first on Aqua-Air Wet/Dry.

Float, Waste Tank-PA027

aquaairwetdry — Wed, 11 Jan 2023 18:08:28 +0000

A float, waste tank is a used to monitor the level of liquid in a tank or other container. It consists of a buoyant object, such as a ball or cylinder, that is connected to a lever or other actuator. As the level of the liquid in the tank rises or falls, the float moves up or down, causing the lever to open or close a valve or other flow-control component.

The post Float, Waste Tank-PA027 appeared first on Aqua-Air Wet/Dry.