aqua pro vac parts Archives - Aqua-Air Wet/Dry

Screw for AA170-PAA192

aquaairwetdry — Wed, 11 Jan 2023 19:46:35 +0000

Screw for use with PA131C (Mounting Plate) and AA170 (Water Chemical Assembly)

1 Individual Screw

Part Number: PA192

The post Screw for AA170-PAA192 appeared first on Aqua-Air Wet/Dry.

Rubber Coupler, 2” ID-PA050

aquaairwetdry — Wed, 11 Jan 2023 18:11:51 +0000

A rubber coupler, 2″ ID is used to connect two pipes or other tubular components together in a plumbing or piping system. It typically consists of a short length of rubber or other flexible material, with fittings or connectors at each end that can be attached to the pipes or components to be joined. The term “rubber coupler” refers to the specific type of coupler that is made of rubber or a similar flexible material. The term “2” ID refers to the size of the coupler, which is designed to fit pipes or components with an inside diameter (ID) of approximately 2 inches

The post Rubber Coupler, 2” ID-PA050 appeared first on Aqua-Air Wet/Dry.

Float, Waste Tank-PA027

aquaairwetdry — Wed, 11 Jan 2023 18:08:28 +0000

A float, waste tank is a used to monitor the level of liquid in a tank or other container. It consists of a buoyant object, such as a ball or cylinder, that is connected to a lever or other actuator. As the level of the liquid in the tank rises or falls, the float moves up or down, causing the lever to open or close a valve or other flow-control component.

The post Float, Waste Tank-PA027 appeared first on Aqua-Air Wet/Dry.

Daughter Board-PA026

aquaairwetdry — Wed, 11 Jan 2023 18:06:53 +0000

A daughter board is a circuit board that is designed to be connected to the mother board, typically a motherboard, in order to add additional functionality or capabilities to a system. It is also commonly referred to as a daughter card, expansion card, or add-on card. A daughter board typically contains one or more processors, memory chips, or other electronic components that are connected to the motherboard through a series of connectors or sockets.

The post Daughter Board-PA026 appeared first on Aqua-Air Wet/Dry.

Thermal Probe, Dual, 250-PA024D

aquaairwetdry — Wed, 11 Jan 2023 18:06:11 +0000

A Thermal Probe, Dual, 250 is used to measure the temperature of our units. It consists of two temperature sensors, or thermocouples, that are connected to a measuring device or controller. The term “Thermal Probe, Dual, 250” refers to the specific type of thermal probe that has two thermocouples and a measurement range of 250 degrees Celsius.

The post Thermal Probe, Dual, 250-PA024D appeared first on Aqua-Air Wet/Dry.

Thermal Probe, 130/150/230-PA024

aquaairwetdry — Wed, 11 Jan 2023 18:05:28 +0000

A thermal probe is used to measure the temperature of our systems. It consists of a temperature sensor, or thermocouple, that is connected to a measuring device or controller. The term “thermal probe” is often used to refer to a device that is specifically designed to measure temperature, although it can also be used more broadly to refer to any device or system that is capable of measuring temperature.

The post Thermal Probe, 130/150/230-PA024 appeared first on Aqua-Air Wet/Dry.

Latch, Waste Tank Female-PA015

aquaairwetdry — Wed, 11 Jan 2023 18:02:26 +0000

A latch for a waste tank is used to secure the tank bottom in place. It is mounted on the tank body. The latch allows the tank to be opened and closed easily, while also providing a secure and stable connection.

The post Latch, Waste Tank Female-PA015 appeared first on Aqua-Air Wet/Dry.

Latch, Waste Tank Male-PA014

aquaairwetdry — Thu, 05 Jan 2023 23:21:44 +0000

A male latch for a waste tank is a type of latch that is designed to be mounted on the waste tank. It is mounted on the tank body. The latch allows the tank bottom to be opened and closed easily, while also providing a secure and stable connection.

The post Latch, Waste Tank Male-PA014 appeared first on Aqua-Air Wet/Dry.