(800) 916-5777
Want a discount? Become a member!

AA003 – Model 150 Heavy Duty Central Vacuum Unit & Wet Extractor

$2,389.12

Product Description:
-Single Canister (14″ x 47″)
-7.2″ Extractor Motor 3 stage, epoxy coated sealed bearings
-145″ Water Lift
-102 CFM
-14amp
-120 volts
-Ideal for homes and light commercial up to 5,000 square feet
-CSA certified


$/mo Apply For Financing

Product Description:
-Single Canister (14″ x 47″)
-7.2″ Extractor Motor 3 stage, epoxy coated sealed bearings
-145″ Water Lift
-102 CFM
-14amp
-120 volts
-Ideal for homes and light commercial up to 5,000 square feet
-CSA certified

Part Number: AA003

Specs
UNIT: One piece made of rustproof, color proof, shock proof, fire retardant, A.B.S. Lustran, 35 cm x 120 cm (14" x 47")
VACUUM MOTORS: Amtek-Lamb 14 Amp., Commercial Extractor model 117-500-13. 3 stage, 7.2" dia.
FACTORY RATING 145" water lift, 102 CFM
RECOVERY TANK The cyclonic separator and cold water spray separate the water, foam and debris from the air flow without restrictive filters or mechanical floats. Large debris is contained in a mesh screen while the liquids automatically dump down the drain.
UTILITY REQUIREMENTS
ELECTRICAL: 120 volt, 60 hertz, 20 amp dedicated standard plug
WATER: Cold water with shut-off. Hot water (up to 170°F [77°C]) with shut-off. Connect directly to water outlets or to optional cleaning solution injector (AA031 or AA033).
DRAIN: 2" DWV drain to sewer. A p-trap will be required and vent to meet plumbing codes.
EXHAUST: If power unit is located in a small room, exhaust air from the vacuum motor must be exhausted to the outside of the building using the most direct route possible.

Reviews

There are no reviews yet.

Be the first to review “AA003 – Model 150 Heavy Duty Central Vacuum Unit & Wet Extractor”

Your email address will not be published. Required fields are marked *